When you put the faucet on it, you will find that the surface of the faucet is prone to water stains after a period of time. When the water stain is dry, it will form very ugly spots. If it is not clean for the time being, even if the faucet is high-grade, it will become very embarrassing. The color is lost, so we must always clean and maintain the faucet. Let's share the tips of faucet maintenance and cleaning.

Faucet maintenance skills

1. Gently wipe the faucet surface with a soft cloth (free of impurities). Avoid using wire harness or scrub pad with hard particles. In addition, do not strike the nozzle surface with hard objects.

2. Use the following cleaners to remove rough facial mask and deposits: mild liquid glass cleaner, pure liquid glass cleaner, acid free, non abrasive soft liquid or fully dissolved powder, and friction free solution polishing.

3. Do not use any abrasive cleaner, cloth or paper cloth; Do not use any acid containing cleaner, polishing abrasive or rough cleaner.

4. If the water pressure is not less than 0.02 MPa (i.e. 0.2 kgf / cm2), after a period of use, if the water volume is reduced or even the water heater is turned off, it can be gently placed at the outlet of the faucet. Gently unscrew the screen cover to remove impurities, which can usually be recovered.

Let's see how to clean the faucet.

First, simple cleaning tips for faucets

Faucet cleaning is not complicated. As long as it is kept, it will keep the faucet forever.

1. If it is a copper faucet, if the plating surface needs to be cleaned, it can be cleaned with boiling water or detergent, or it can be directly cleaned with some degreasing detergent.

2. For the scale and rust on the faucet, just wipe the surface with a damp cloth or sponge and a little special detergent, and then wipe with a clean rag or rinse with water.

3. Wipe the toothpaste with a soft toothbrush or gently wipe the toothpaste with a clean cloth. It can remove scale and grease and make the faucet surface clean and bright.

4. Many people only pay attention to the surface of the faucet when cleaning the faucet, but in fact, the interior of the faucet is more important. If the water output of the faucet is reduced or the water flows out of the fork, it may be caused by the clogging of the bubbler. The bubbler can be removed, soaked in vinegar, cleaned with a small brush or other tools, and then reinstalled.